Advanced Defrag Official Blog
Free Support For Hard Drive Defragmentation
Posts tagged defragmenting
Defragmentation—Some Tips to Defragment Faster
Oct 28th
Defragmentation is very useful for optimizing the computer performance, I think, no one may doubt that. But the question is, in the current fast world, since time is so precious for every person, how we can shorten the process of defragmentation and improve computer performance as well. In this article, you can learn some tips to defragment faster.
Ahead of defragmentation, it is a must to close down screensaver program; otherwise, defragmentation may start again and again. But, it is rather tedious and time-consuming. Here, I will tell you a method to close down screensaver automatically by revising the registry.
First, type “regedit” in the “Start”—“Run” to open “Registry Editor”, click the following key values in turns: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets. Find whether there is a value called “Defrag”, if not, you can set a new one (but, normally, it is there under default condition). In the “Defrag”, reset a main value named “Settings” under which set another one called “DisableScreenSaver”. You just need to change it default character string value into “YES”. That is OK.
After that, the screensaver will shut down automatically when defragmenting, and open again after defragmentation. See, does it really save your time and energy? You do not have to click the mouse back and forth.
And, if the capability of hard disk and partition is rather small, it will not take too much time to defragment. But, as for those big ones crammed with data, if you want to clean them entirely, I am afraid it is a long process. So, when dealing such problems, you can take two methods as follows:
One is to close down optimize parameter program or any other programs that may hinder the speed in your system so as to quicken defragmentation.
Resource box:
Anther is to apply certain special defrag to finish this task. For example, I am using the “Advanced Defrag” currently. After being tested hundreds of times, it proves to be very powerful and useful. If you are interested in it, you can click here to find this efficient defrag.
Key words: screensaver, defrag, defragmentation, defragmenting, defragment
Slow PC? Defragment it Now
Oct 28th
Have you bothered that your PC is running slower and slower, even you cannot detect any virus in it? What is wrong with it? As a matter of fact, it is likely that your computer is overstaffed by a lot of junks in the hard disk. If you want to get rid of the slow PC, it is advisable for you to remove those junks first.
And, in this article, I will tell you something about such junks and help you how to remove them.
Such junks are called fragments in the hard disk which are caused by frequent read-write operation and deleting and moving files. Once the fragments are increasing, it has influence on the read-write speed definitely, but not on the integrity on the files. However, it is undoubted to hinder the speed of computer. After using the hard disk for a long time, the restored areas have been occupied by messy fragments. What is worse, you can not put any large files on them but they still occupy a large number of spaces. So, you have to clear up them so as to accumulate a larger and empty space to put more files. Well, there are other features of fragments you should know about.
First, the fragments are available spaces in fact; even so, they are too small to form a large space to restore any file, what is more, such fragments are displaced in a mess which forces them to arrange orderly. And, the so-called “defragmentation” is to collect them to turn into a useful restored space. Because the files are put continuously, it can reduce the time to read among disk heads in the hope to speed up read-write operation and expand the usage of hard disk as well.
As mentioned above, you are bound to defragment your hard disk. Maybe turning to the “Disk Defragmenter” of the Windows is your first choice. You can right-click the disk needed to defragment, choose “Properties”—“Tool” and then start the defragmentation. However, the time of defragmenting is connected with your computer performance, the size of your disk data and so forth.
But, normally, the “Disk Defragmenter” is rather shabby in cleaning speed and efficiency; worse, it cannot provide more advanced functions in defragmentation. Here, I recommend you to use a third party tool which has gained a lot of praises. If you have never used it before, you are supposed to have a try with few clicks. Please click here to download Advanced Defrag for a 7 days free use now!
Key words: defragment, defragmentation, defragmenting, hard disk, fragment, fragments.
Disk Defragment—How to Solve defragment Disk Problems?
Oct 27th
It is known to all that defragmentation can speed up the computer. And, everyone absolutely has defragmented or tried to do it. Some may have encountered such problems that it is impossible to continue to defragment the disk, especially C disk. Well, in this article, you will learn some specific methods to solve it.
The problem is why the C disk can not keep defragmenting?
In the Windows XP system, when conducting defragmentation, the system reminds you that the files of C:\Windows\prefetch\WMIPRVSE.EXE-28F301A9.PF are broken or damaged, so it cannot continue to scan the system.
In fact, C:\Windows\Prefetch\ is the pre-reading folder of Windows XP. The system restores frequent used data in this folder so as to facilitate the reading speed when it needs to read those data again. However, since you use the folder for a long time, the Prefetch folder becomes bigger and bigger, even some broken files are hidden here. So, if you do not take any action to get rid of these junks, it is vulnerable to appear the above problem. And the simple solution to this is to clear up the whole folders and then perform defragmentation.
And, when you find C disk has been overstaffed and computer is running slowly, it is time for you to clear up it immediately. Here are some tips I have been using as follows:
1. Clear up the temporary files in the C disk. Such as the system temporary files with the extension of “INTERNET”. They are nothing but useless which takes up the space largely.
2. Clean up the desktop and the files in “My Documentary” and remove the files with large size to other disks.
3. Form a good habit—do not install application in the C disk as much as possible. If you have installed in it, you had better reinstall them to other disks.
4. Use defrag to clean up fragments and clear registry.
Besides, if programs are uninstalled abnormally, such as deleting DEL files directly, you have to clean up the registry. On the other hand, you can delete the remaining uninstalling and used information, archived data and so on.
All in all, it is quite important for you to shape a good habit of <a href=”http:// www.advanceddefrag.com”>defragmenting disks</a>. But if the problems happen, besides solving them manually, you can also use <a href=”http:// www.advanceddefrag.com”>some helpful tools</a> to share the burden.
Key words: defragmentation, defrag, defragmenting, defragment, C disk
Defragment Disk—Why Cannot Continue Defragmentation?
Oct 27th
It is unavoidable for any user to defragment disk as long as he wants to improve his computer performance. But, during the defragmentation, a mess of unexpected problems hinder to complete the task perfectly.
Have you encountered that you cannot continue to defragment disk when it is carrying on certain progress? If so, you cannot afford to miss this article, because it will tell you how to solve this problem completely.
When defragmentation is conducting from 1% to 10%, it is the stage of detecting drive programs and reading its information actually. After ten percent of defragmentation, it just begins to defragment from here. If the system is plunged into vicious loop, it is likely because of remaining programs piling in the memory. For example, the anti-virus software or screensaver program disturbs the normal disk scanning and holds back the program to run on the rails which drags the system into vicious loop. And, how to defragment smoothly?
First of all, it is a must to close down all the remaining programs before defragmenting disk. Such programs make system read and write disk repeatedly so that hinder the process of defragmentation.
Second, if defragmenting still can not work after shutting down programs, you should try to detect disk thoroughly by using the order of “SCANDISK” including test surface to find whether there is any problem of disk itself.
Then, if users have not cleared up the fragments in the disks for a long time, it really takes a lot of time to continue the defragmenting process from ten percent to eleven percent. You can click to display the information to open system operation process to see whether the operation falls into vicious loop.
By following the above steps, you can get rid of such head ached problems. And, if you have any other problem, you can click here to find more information about defragmentation.
Defragment Disk—Useful Knowledge about Defragmentation
Oct 27th
Have you even wondered that why it is necessary to clear up disk regularly? It is the same that if your room is in a mess, you really need to clear it up. Since the disk is the room for the files, you are bound to defragment it on time.
Well, in this article, I will tell you the useful knowledge about defragmentation in hope to help you solve the problems in this regard.
First of all, defragmentation is quite helpful for optimizing system performance. The file layout on the disk has great influence on I/O performance. And, excessive and scattered fragments in the disk can damage computer performance seriously. Although Windows XP can re-lay certain files automatically to improve the performance, in the default condition, it is not the necessary system routine to do it and only contains a small part of the files. It can not defragment completely. That is the why you should clear up fragments specially rather than let it done by computer itself.
In this regard, you should perform complete defragmentation immediately after installing the system or uninstalling any program. In the default condition, Windows XP may defragment partly once three days. And the moved files will be written into Layout.ini files which are based on the current usage of disk to adjust physical positions of the files. So, Windows XP is supposed to arrange the physical files in the disk in the mentioned order. Its routine is in the C:\Windows\Prefetch.
System can defragment automatically when there is not so much work to do. At this moment, system will choose the files in the Layout.ini preferentially and defragment them partially. They are the base of defragmentation program to move files.
All in all, it is a must to defragment disk regularly. if you find it is a rather tedious work, you can turn to a useful tool which can save your time and energy a lot
Key words: computer performance, defragmentation, defragment, defragmenting
Defragmentation–Why I can not continue to defragment the disk?
Oct 27th
It is known to all that defragmentation can speed up the system. But, have you ever been puzzled that the defragmentation is interrupted suddenly and can not continue any more? If so, you cannot miss this article because it can help you solve this problem.
Before conducting defrag, in the first place, it is better for you to scan the disks in case the track and files are broken or missing. And, you should close down all the programs that are running reading and writing operations to the disks, for example, the anti-virus software may hinder the defragmenting process. That is to say, the disk cleaning program cannot continue if any reading and writing operation is running.
If such problem happens, it is likely that you have set that Windows manage the virtual memory automatically. Since it manages for a period of time, Windows can alter the virtual memory automatically. So the cleaning disk program has to clear up the hard disk from the very beginning. In order to defragment smoothly, you should force your Windows’ automatic management of virtual memory or to set a fixed value.
Besides, you also have to check whether you have set screensaver or not. When the system has finished 10% of defragmenting process, then the screensaver is open, your computer has to clean up from the beginning again. Therefore, you are supposed to close down the screensaver so as to let other background programs complete defragmentation. After doing that, you can start the “Disk Defragmenter” in the Windows to see whether it get right or not.
But, since the cleaning program of Windows is not efficient enough, I recommend you to turn to other professional defrag program like Advanced Defrag, which can save your time and energy a lot.
Keywords:
Defragment, defragmentation, defragmenting, defragment the disk
Disk Defragmentation – Reasons For Defragmenting Disk Regularly
Oct 26th
Fragments could decrease the effectiveness of data access, therefore make your computer run slow. Furthermore, they could ruin the hard disk. What is worse, they increase the risk of data loss.
Firstly, fragments slow down the data access and therefore computer speed. Fragments are separate units of a file which are saved in different places in hard disk. It takes much more time to load a files of numerous fragments than to load a file which is saved as a whole. They lead to ineffectiveness of the hard disk. That is a good reason why your computer slow down when you use after a long time.
Secondly, due to overload, your hard disk could be more short-lived than usual. Because Windows system needs to fetch data from several locations to load a file. So the hard disk have to wheel faster to access the data. Before long, it will cause a lot of wear and tear in hard disk.
Thirdly, because fragments are located differently. It greatly increase the risk of data loss. If one fragment is saved in the bad track, Windows will not be able to read it. Unless you resort to professional data recovery tool, the whole file cannot open.
It is advised that you defragment the hard disk regularly. It can not only increase data access speed and improve computer performance, but also save your hard disk from overload and protect valuable files. It’s advised that conduct defragmentation once a month. But note that do not defrag too much. Because overdoing defragmenting also does harm to your hard disk.
You can use a defragmenter to defragment by just few clicks. I recommend a good defragment tool which can effectively defrag all fragments. You can click here to download it.
